The Ultimate Guide to Measuring and Installing Roman Blinds

 Roman blind is one of the many types of blinds that are available. The Roman blinds are most preferred for residential projects as they are very versatile and suit any décor style. This is one of the best types of blind for homes, farm houses and resorts. Roman shades allow you to dress up your room in almost any fashion or style to suit your taste. They’re easy to operate and look great in any room.

Roman blinds are made from fabric, hence giving you the freedom to bring your personal style by way of any print, pattern or color to your window treatment. They are with fabric and draw up into pleats. Once rolled up fully they neatly fall into pleats often measuring 6 to  8 inches. 

They’re easy to operate and look great in any room. The perfect fit for a beautiful new window treatment all starts with an accurate measurement. If you’re planning a DIY window treatment project, our guide makes measuring easy!

Get Professional Help

We have professionals available to measure and install blinds in six cities across India. Feel free to book an appointment to get your blinds measured and delivered.

You can book an appointment for the blind measurement service in any of the following cities – Bangalore, Hyderabad, Secunderabad, Chennai, Pune and Gurgaon. Our expert executives will visit your home, provide home measurement assistance and share a quote once we have your measurements. Book Installation here.

And remember, you can always Find a Pro in your area to complete the project for you!

How to decide when to opt for a Roman Blind?

There is no hard and fast rule for defining if you need Roman blind of curtains for a particular place. But Roman Blinds are recommended for the following places :

• Tight spaces with smaller windows. If there is an odd shaped window next to your wardrobe in the Utility or bedside. Roman Blinds are the most efficient and space saving option
• Bay windows - Bay windows are usually in-set with a seating arrangement, hence blinds are a great choice here as they dont have fabric hanging and hence does not obstruct other activities. 
• Walkways and windows on stairways. Since these are usually tight on spaces, a neat and compact blind will suit the space that curtains
• Small study room – If you have a compact study room with desks closer or attached to the wall. A neat inside mount blind will make your room look organized and spacious.
• Small bedroom – Small bedrooms are again an ideal candidate for blinds as they occupy less space and give room for other furniture. 

The Yellow Dwelling offers customized roman blinds that you can order online from the comfort of your home. Explore the wide range of prints, patterns and colors here. Explore Blinds.

What are the different types of blind mount?

Inside mount: In this type of mount the roman blind is fitted exactly into the inside the window frame or casing. They provide a very sleek and clean look and let you showcase the window molding if any. This occupies far less space allowing you more room to use other furniture. 

Outside mount: Outside mount is when you mount the roman blinds outside of the window frame. This is done if you want to completely arrest the light that comes through the window. When you mount them outside you also make the window look large and can arrest all the light that passes through the window. This is also a safer option if you are not too sure of the inside measurements. 

Now let’s get started with the measurements. 

What You Will Need

- Steel Tape Measure

- Step Ladder (if necessary)

- Pencil and note

Helpful Hints Before You Begin Measuring for Roman Shades

- Use a Steel Tape Measure: For the most accurate measurements.

- Follow the Width by Height Format (W x H): Always record width followed by height and mark them as such.

- Measure to the Nearest 1/8 Inch: Never round up or down to the nearest half or whole inch.

- Measure Each Window Individually: Even if they look alike, windows can vary in size.

How to Measure for Inside Mount Roman Shades

Inside mount Roman shades are installed inside the window frame or casing, providing a sleek, clean look that showcases your window size and moldings. Here’s how to measure for inside mount Roman shades:

1. Measure the Depth: Measure from the front of the opening to the glass to ensure your window recess meets the minimum depth requirement for an inside mount. Refer to the Mounting Requirements section for your chosen Roman shade.
2. Measure the Width: Record the width at the top, middle, and bottom of your window opening. Circle the narrowest measurement – this is the number you submit for your window’s width.
3. Measure the Height: Measure the height in three places: left, center, and right. Circle the tallest measurement - this is the number you submit for your window’s height.
4. Order at the Exact Opening Size: No deductions needed; the factory will take deductions in production.
5. Double Check Your Measurements: Ensure they follow the width by height format (W x H).

How to Measure for Outside Mount Roman Shades

Outside mount Roman shades are mounted on the window molding or wall above your window. They are a good choice if an inside mount is not possible due to window depth or obstructions around the window frame. Here’s how to measure for outside mount Roman shades:

1. Check the Mounting Requirements: Ensure you have enough flat surface for mounting hardware.
2. Determine the Width: If you have window trim, measure to the far edges of the trim from left to right. If not, add two to three inches on each side of your window for light gap coverage and privacy, then measure the width between these points.
3. Determine the Height: If you have a protruding window sill, start at the sill and measure three inches beyond the top of the window opening for mounting hardware. If not, start two inches below the sill for maximum coverage and measure three inches beyond the top of the window opening.
4. Double Check Your Measurements: Ensure they follow the width by height format (W x H). Remember, outside mount Roman shades will be made to the exact specified size.

How to decide the no. of blinds needed for a window

The maximum width that can be achieved for a blind is 58". Incase of a window with a width wider than 58", you will need more than one blind.

Incase of a wider window, split the complete width into 2 blinds of same width. If the width of the individual blinds is more than 58", split the complete window width into 3 blinds.

For example:

Window width is 60"- Opt for two 30" width blinds

Window width is 110"- Opt for two 55" width blinds

Window width is 162"- Opt for three 54" width blinds

Installation Guidelines

We provide installation service in 6 cities in India currently - Bangalore, Hyderabad, Secunderabad, Chennai, Pune and Gurgaon. If you need this assistance, please contact our customer care. 

You can also call a local technician to install your blinds. The installation can also be done by yourself as a DIY project. 

Once you receive your Roman shades, follow these tips for a smooth installation:

1. Gather Your Tools: Ensure you have a drill, screws, a level, and the mounting brackets.
2. Position the Brackets: For inside mounts, position the brackets inside the window frame. For outside mounts, position them on the wall or molding.
3. Install the Brackets: Use a drill to secure the brackets in place.
4. Attach the Shades: Once the brackets are secured, attach the shades according to the manufacturer’s instructions.
5. Test the Shades: Ensure they operate smoothly and make any necessary adjustments.

So now you are all equipped to install your Roman blinds! Gather the necessary tools, position and install the brackets, attach the shades, and ensure they operate smoothly. Following these steps, you can easily measure and install Roman shades, transforming the look and feel of your windows.

Happy decorating!